Course Catalog
Training courses designed to maximize employee participation and drive home key concepts. Many training courses include optional content like printable supplemental materials, tips, and refresher trainings.
Let's TalkCategory Bundles
Visit these pages with more info about unique course offerings not listed below
Courses: 885
Occupational Safety & Health
- Asbestos Hazard Awareness
- Back Safety and Injury Prevention
- Behavior Based Safety (BBS)
- Bloodborne Pathogens (BBP)
- Cardiopulmonary Resuscitation (CPR)
- Chemical Safety
- Chlorine Safety
- Cold Stress
- Compressed Gas Safety
- Confined Space Entry - Permit Required
- Confined Spaces
- Criticality Safety
- Distracted Driving
- Driver Safety
- Electrical Safety: Hazards, Controls, and Best Practices
- Electrical Safety Training
- Emergency and Fire Safety Preparedness
- Employee Safety Orientation
- Excavation, Trenching and Shoring Safety
- Fall Protection - Construction
- Fire Extinguisher Safety
- First Aid
- Flammable Liquid Safety
- Forklift Operator
- Formaldehyde Safety
- Hand and Power Tools
- Hand Safety
- Hazard Communication (HAZCOM GHS)
- HAZWOPER - Decontamination
- HAZWOPER - Hazardous Materials Chemistry
- HAZWOPER - Introduction
- HAZWOPER - Personal Protective Equipment (PPE)
- Hearing Conservation
- Heat Stress
- Hot Work
- Hydrogen Sulfide (H2S) Safety
- Incident Investigation
- Indoor Air Quality
- Industrial Ergonomics
- Introduction to Caught In-Between Hazards
- Job Safety Analysis
- Laboratory Safety
- Ladder Safety
- Lead Awareness
- Lockout Tagout for Authorized Workers
- Lockout/Tagout
- Machine Guarding
- Maritime Lockout/Tagout Plus
- Mobile Elevating Work Platforms: Aerial and Scissor Lift Safety
- Mobile Ladder Safety
- Office Ergonomics
- Overhead and Gantry Crane Safety
- Pandemics: Slowing the Spread
- Passenger Van Driver Safety
- Personal Fall Arrest Systems
- Personal Protective Equipment (PPE)
- Powered Industrial Truck Safety
- Preventing Spills
- Process Safety Management
- Radio Communications
- Respiratory Protection
- Rigging Safety
- Safe Driving Behavior for Commercial Motor Vehicles (CMVs)
- Safety Audits
- Scaffold Safety
- Silica Hazards
- Slips, Trips, and Falls
- Traffic Control (Flagger)
- Work-Related Injury and Illness Recordkeeping (WRIIR)
- Workforce Hazard Recognition
- COVID-19: Workplace Safety
Human Resources
- Absences from the Workplace
- Active Shooter Response Training
- Computer Security
- Discrimination-Free Workplace
- Drug and Alcohol-Free Workplace
- Ethics
- Reporting Sexual Harassment in New York
- Sexual Harassment and Discrimination Prevention for California
- Sexual Harassment and Discrimination Prevention for California Supervisors
- Sexual Harassment and Discrimination Prevention for Employees
- Sexual Harassment and Discrimination Prevention for Managers
- Sexual Harassment and Discrimination Prevention for New York
- Sexual Harassment and Discrimination Prevention for New York Managers
- Violence in the Workplace
Environmental Management
- Air Emissions Management
- Emergency Planning and Community Right-to-Know Act [EPCRA]
- Environmental Management Fundamentals
- Hazardous Waste Management
- Oil Spill Prevention, Control, and Countermeasure (SPCC)
- Resource Conservation Recovery Act (RCRA)
- Stormwater Management
- TSCA (Toxic Substances Control Act)
- Wastewater Management
- Universal Waste Management
Higher Education
- University Laboratory Safety
- Autoclave Safety
- Biosafety Cabinets
- Field Research Safety
- Fume Hood Safety
- Handling Radioactive Materials
- Introduction to Biosafety
- Introduction to Radiation Safety
- Laboratory Compressed Gas Safety
- Laboratory Safety Refresher
- Laser Safety
- Liquid Nitrogen Safety
- Recombinant DNA
- Risk Assessment
- Sharps Safety
- Small Spill Cleanup
- X-Ray Safety
- Shop Safety
Transportation
- DOT Hazmat
- DOT: Driver Logs
- Driver Qualifications
- Driver Wellness
- Drug and Alcohol Testing -- Employee
- Drug and Alcohol Testing for Supervisors - Reasonable Suspicion
- Hazardous Materials Transportation: Bulk Transport
- Hazardous Materials Transportation: Handling Non-Bulk Packages
- Pre- and Post-Trip Inspections
- Profiled in Safety
- Transportation of Dangerous Goods
Canadian Safety & Health
Mine Safety (MSHA)
Electric Utilities
- Bucket Rescue
- Communications Facilities 1910.269
- Dog Attack Prevention
- Electrical Clearances 1910.269
- Enclosed Spaces 1910.269
- Excavations 1910.269
- General Concepts 1910.269
- Grounding 1910.269
- Hand and Portable Power Tools 1910.269
- Hazardous Energy Control Procedures 1910.269
- Job Briefings 1910.269
- Ladders, Platforms, Step Bolts, and Manhole Steps 1910.269
- Line Clearance Tree Trimming 1910.269
- Mechanical Equipment 1910.269
- Medical Services and First Aid 1910.269
- Overhead Lines 1910.269
- Overhead Lines with Live-Line, Bare-Hand Work 1910.269
- Personal Protective Equipment 1910.269
- Power Generation 1910.269
- Sling Safety
- Special Conditions and Materials Handling 1910.269
- Substations 1910.269
- Testing and Test Facilities 1910.269
- Underground Electrical Installations 1910.269
- Vault and Pole-Top Rescue 1910.269
- Working On or Near Exposed, Energized Parts 1910.269
- Working with Self-Contained Meters
Arc Flash Training (NFPA 70E)
HAZWOPER
OSHA 10 & 30
- OSHA 10 Hour Construction Safety (Proctored: NYC Only)
- OSHA 10 Hour Construction Safety
- OSHA 10 Hour General Industry (Proctored: NYC Only)
- OSHA 10 Hour General Industry
- OSHA 30 Hour Construction Safety (Proctored: NYC Only)
- OSHA 30 Hour Construction Safety
- OSHA 30 Hour General Industry (Proctored: NYC Only)
- OSHA 30 Hour General Industry
NERC System Operator Certification and Continuing Education Database CEH
- MTS_4625_301-02 - Electrical Distribution System Fundamentals (1.5 CEHs)
- MTS_4625_301-03 - Primary and Secondary Distribution Systems (1.5 CEHs)
- MTS_4625_301-04 - Distribution System Components and Application (1.0 CEHs)
- MTS_4625_301-05 - Characteristics of Distribution Switchgear (1.0 CEHs)
- MTS_4625_301-06 - Load Characteristics and Management (1.0 CEHs)
- MTS_4625_301-07 - Principles of Revenue Metering (1.5 CEHs)
- MTS_4625_301-08 - Single and Poly-phase Metering (1.0 CEH)
- MTS_4625_345-01 - NERC Overview and Application for Generator Operators (2.0 CEHs)
- MTS_4625_350-01 - Elements of System Protection (2.5 CEHs)
- MTS_4625_350-02 - Types of Protective Relays (2.5 CEHs)
- MTS_4625_350-03 - Monitoring System Conditions (2.5 CEHs)
- MTS_4625_350-04 - Disturbance Monitoring Equipment (2.0 CEHs)
- MTS_4625_350-05 - Line Protection (1.0 CEHs)
- MTS_4625_350-06 - Transformer Protection (1.0 CEHs)
- MTS_4625_350-07 - Pilot Protection (1.0 CEHs)
- MTS_4625_350-09 - Bus Protection (1.5 CEHs)
- MTS_4625_350-10 - Generator Protection (2.5 CEHs)
- MTS_4625_350-11 - Protection System Misoperation and Maintenance (1.5 CEHs)
- MTS_4625_375-01 - Real Power Balancing Control Performance (3.0 CEHs)
- MTS_4625_375-02 - Disturbance Control Performance (2.0 CEHs)
- MTS_4625_375-03 - Frequency Response and Bias (2.0 CEHs)
- MTS_4625_375-05 - Automatic Generation Control (3.0 CEHs)
- MTS_4625_376-01 - Bulk Power System Communication Basics (1.0 CEHs)
- MTS_4625_376-02 - Bulk Power System Communications and Coordination (2.0 CEHs)
- MTS_4625_377-01 - CIP Personnel Responsibilities (1.0 CEHs)
- MTS_4625_377-02 - CIP Perimeters and Configurations (1.0 CEHs)
- MTS_4625_377-03 - CIP Controls and Management (1.0 CEHs)
- MTS_4625_377-04 - CIP Related BES Recovery Plans (1.0 CEHs)
- MTS_4625_377-05 - CIP Physical Security (1.0 CEHs)
- MTS_4625_378-01 - Emergency Policies and Procedures (1.5 CEHs)
- MTS_4625_381-05 - Reliability Coordination – Planning and Operations (1.5 CEHs)
- MTS_4625_387-01 - Energy Production and Transfers (1.5 CEHs)
- MTS_4625_387-02 - Transmission Operations (2.5 CEHs)
- MTS_4625_387-04 - Power System Control Elements (1.5 CEHs)
- MTS_4625_387-05 - Interconnected Energy Accounting (2.0 CEHs)
- MTS_4625_387-07 - Supervisory Control and Data Acquisition Systems (SCADA) (2 CEHs)
- MTS_4625_387-10 - Power System Restoration (2.0 CEHs)
- MTS_4625_388-01 - Active and Reactive Power Fundamentals (2.0 CEHs)
- MTS_4625_417-01 - Switchgear (2.0 CEHs)
- MTS_4625_417-02 - Low Voltage Breakers (1.0 CEHs)
- MTS_4625_417-03 - Medium and High Voltage Switchgear (2.0 CEHs)
- MTS_4625_417-04 - General Switchgear Maintenance (1.5 CEHs)
- MTS_4625_505-02 - Steam Turbine Control and Operation (1.5 CEHs)
- MTS_4625_507-01 - Generator and Auxiliary Systems Functions (1.0 CEHs)
- MTS_4625_507-03 - Generator Construction and Process Control (1.0 CEHs)
- MTS_4625_560-01 - Main Transformers (1.5 CEHs)
- MTS_4625_560-04 - Protective Relays and Instrument Transformers (1.0 CEHs)
- MTS_4625_561-01 - Preparing for Power Plant Start-ups (1.5 CEHs)
- MTS_PILOT_381-06 - Coordinating Entities and Duties (IN PILOT)
- MTS_PILOT_387-03 - Economic Power System Operations (IN PILOT)
- MTS_PILOT_388-02 - Active and Reactive Power Limits and Flows
5 Minute Overviews
- Arc Flash and Electrical Safety Best Practices (NFPA 70E) Overview
- Asbestos Hazards Awareness Overview
- Back Care and Ergonomics Overview
- Back Safety Overview
- Behavior-Based Safety Overview
- Bloodborne Pathogens (BBP) Overview
- Bloodborne Pathogens for Healthcare Workers Overview
- Cardiopulmonary Resuscitation (CPR) Overview
- Chemical Safety Overview
- Cold Stress Overview
- Cold, Flu, and Transmissible Illness Prevention
- Compressed Gas Overview
- Computer Security Overview
- Confined Spaces Entry - Permit Required Overview
- Confined Spaces Overview
- Conveyor Safety
- COVID-19 Masks, Coverings, and Respirators
- Disinfecting the Workplace for COVID-19
- Driver Safety Overview
- Dropped and Fallen Objects
- Drug & Alcohol-Free Workplace Overview
- Drug and Alcohol Testing for Employees Overview
- Earthquake Preparedness
- Electrical Safety: Hazards, Controls, and Best Practices Overview
- Electrical Safety Overview
- Emergency and Fire Preparedness Overview
- Emergency Planning and Community Right-to-Know Act (EPCRA) Overview
- Employee Safety Orientation Overview
- Environmental Management Fundamentals Overview
- Excavation, Trenching, and Shoring Overview
- Eye Safety
- Eyewashes and Safety Showers
- Fall Protection - Construction Overview
- Fatigue and Stress Awareness
- Fire Extinguisher Safety Overview
- Fire Extinguishers: Monthly Inspections
- Fire Safety and Patient Evacuation Overview
- Hand and Power Tool Safety Overview
- Hand Safety Overview
- Hazardous Waste Management Overview
- HAZCOM Overview
- HAZWOPER - Decontamination Overview
- HAZWOPER - Hazardous Materials Chemistry Overview
- HAZWOPER - Introduction Overview
- HAZWOPER - Personal Protective Equipment (PPE) Overview
- Hearing Conservation Overview
- Heat Stress Overview
- HIPAA for Covered Entities Overview
- Hot Work Overview
- Hurricane Preparedness
- Indoor Air Quality Overview
- Industrial Ergonomics Overview
- Intro to Ammonia Hazards
- Intro to Benzene Hazards
- Intro to Beryllium Hazards
- Intro to Cadmium Hazards
- Intro to Caught In-Between Hazards
- Intro to Combustible Dust Hazards
- Intro to Hexavalent Chromium Hazards
- Intro to Hydraulic Safety
- Intro to Loading Dock Safety
- Intro to Mold and Mildew Awareness
- Intro to Pallet Jack Safety
- Intro to Personal Safety
- Intro to Pressure and Power Washer Safety
- Intro to Safe Material Storage
- Intro to Site Security
- Intro to Skid Steer Loaders
- Intro to Spray Finishing Hazards
- Intro to Utility Cart Safety
- Intro to Wildfire Smoke Safety
- Ladder Safety Overview
- Lead Awareness Overview
- Lock and Tag Overview
- Lockout Tagout for Authorized Workers Overview
- Machine Guarding Overview
- Medical Hazard Communication Overview
- Mobile Elevating Work Platforms: Aerial and Scissor Lift Safety Overview
- Mosquito, Tick, and Vector-Borne Illnesses
- Office Ergonomics Overview
- Oil Spill Prevention, Control, and Countermeasures (SPCC) Overview
- Overhead and Gantry Crane Safety Overview
- Personal Fall Arrest Systems Overview
- Process Safety Management Overview
- Reporting Sexual Harassment
- Resilience and Stress Management
- Respiratory Protection Overview
- Rigging Safety Overview
- Scaffold Safety Overview
- Sexual Harassment and Discrimination Prevention for Managers Overview
- Sexual Harassment and Discrimination Prevention Overview
- Silica Hazards Overview
- Slips, Trips, & Falls Overview
- Stairway Hazards
- Stormwater Management Overview
- Tornado Preparedness
- Violence in the Workplace Overview
- Wastewater Management Overview
- Winter Weather Driving
- Workplace Signs, Labels, and Tags
- Workspace Cleanliness
Safety, Health, and Plant Science
- 101-71 - Introduction to Industrial Hygiene
- 117-01 - Hazardous Materials Safety
- 117-02 - Acid and Caustic Awareness
- 117-04 - Ammonia Awareness
- 117-07 - Radiation Awareness
- 117-08 - Hazardous Gases Methane, Carbon Monoxide, and Carbon Dioxide
- 117-20 - Gas Monitoring Basics
- 118-03 - Toxicology
- 118-04 - Medical Surveillance
- 130-03 - Hazardous Material Procedures
- 130-06 - Root Cause Analysis
- 130-07 - Safety and Health Programs
- 170-01 - Introduction to Industrial Math
- 170-02 - Industrial Math: Measurements and Calculations
- 170-03 - Industrial Math: Fractions, Percentages, and Ratios
- 171-01 - Atomic Structure and Chemical Bonding
- 171-02 - Introduction to the Periodic Table of Elements
- 171-03 - Chemical Formulas, Reactions, and Solubility
- 171-04 - Introduction to Hydrocarbon Chemistry
- 171-05 - Chemical Equations
- 171-10 - Introduction to Physics Force and Motion
- 171-11 - Introduction to Physics Energy, Work, and Power
- Additional Industrial Skills Training from SOS
Mechanical Maintenance
- 201-01 - Working Principles of Simple Machines
- 201-02 - Hand Tools I
- 201-03 - Hand Tools II
- 201-04 - Portable Power Tools
- 201-05 - Torque Wrenches
- 202-01 - Introduction to Belt Drive Maintenance
- 202-02 - V-Belts
- 202-03 - Positive Traction Belt Drives
- 202-04 - Sheave Maintenance
- 202-05 - Introduction to Conveyor Systems
- 202-06 - Conveyor System Design
- 202-07 - Conveyor Belt System Inspection
- 202-08 - Conveyor Belt Installation and Repair
- 203-01 - Introduction to Bearings
- 203-02 - Rolling Contact Bearings
- 203-03 - Sliding Surface Bearings
- 203-04 - Bearing Installation and Removal
- 203-05 - Bearing Seals
- 203-06 - Troubleshooting Bearing Failures
- 205-01 - Introduction to Gear Drives
- 205-02 - Types of Gears
- 205-03 - Maintaining Gear Drives
- 205-04 - Clutches
- 207-01 - Lubrication Selection and Sampling in Rotating Machinery
- 207-02 - Lubrication Failures and Management in Rotating Machinery
- 207-03 - Lubrication Analysis in Rotating Machinery
- 208-01 - Pipe Connections and Symbols
- 208-03 - Piping Construction and Sizing
- 208-04 - Piping Expansion, Support, and Insulation
- 208-05 - Piping Auxiliaries
- 208-06 - Tubing Types and Applications
- 208-07 - Tube Fittings and Connection Methods
- 208-08 - Tube and Conduit Bending
- 209-01 - Couplings
- 209-03 - Pre-Alignment Procedures
- 209-04 - Rough Alignment
- 209-05 - Mathematical Rim-and-Face Alignment
- 209-06 - Graphical Rim-and-Face Alignment
- 209-07 - Reverse Dial Alignment
- 209-09 - Laser Alignment
- 211-01 - Introduction to Chain Drives
- 211-02 - Chain Drive Maintenance and Troubleshooting
- 213-01 - Lubrication Basics
- 213-02 - Types of Lubricants
- 213-03 - Lubrication Sampling and Analysis
- 213-04 - Lubrication Filtration and Purification
- 213-05 - Lubrication Delivery Methods and Systems
- 215-01 - Introduction to Valves and Their Components
- 215-02 - Valve Actuators
- 215-03 - Gate Valves
- 215-04 - Globe Valves
- 215-05 - Butterfly Valves
- 215-06 - Ball Valves
- 215-07 - Check Valves
- 215-08 - Needle Valves
- 215-09 - Plug Valves
- 215-10 - Diaphragm Valves
- 215-11 - Pinch Valves
- 215-12 - Safety and Relief Valves
- 215-13 - Solenoid Valves
- 215-14 - Valve Positioners
- 215-15 - Pressure Regulator Valves
- 219-01 - Introduction to Centrifugal Pumps
- 219-02 - Centrifugal Pump Design
- 219-03 - Centrifugal Pump Fundamentals
- 219-04 - Centrifugal Pump Operation
- 223-01 - Heat Exchanger Theory
- 223-02 - Open Heat Exchanger Design and Operation
- 223-03 - Closed Heat Exchangers
- 225-01 - Compressed Air Systems
- 225-02 - Compressed Air System Components
- 225-03 - Positive Displacement Compressors
- 225-04 - Dynamic Compressors
- 229-01 - Bolted Joints
- 229-02 - O-Rings
- 229-03 - Making Gaskets
- 229-04 - Fasteners
- 229-05 - Packing Material Use and Installation
- 229-06 - Mechanical Seals Use and Installation
- 231-01 - Introduction to Positive Displacement Pumps
- 231-02 - Reciprocating Positive Displacement Pumps
- 231-03 - Displacement Pumps
- 243-01 - Introduction to Hydraulics
- 243-02 - Hydraulic Systems
- 243-03 - Hydraulic Fluids
- 271-01 - Vibration Introduction
- 271-02 - Vibration Causes and Characteristics
- 271-04 - Plant Vibration Program
- 273-01 - Boiler Tube Repair
- 273-02 - Inspecting the Fireside of a Boiler, Part 1
- 273-03 - Inspecting the Fireside of a Boiler, Part 2
- 273-04 - Inspecting the Waterside of a Boiler
- 273-05 - Inspecting a Boilers Exterior
- 273-06 - Waterside and Fireside Cleaning of a Boiler
- Additional Industrial Skills Training from SOS
Electrical Distribution
- 301-03 - Primary and Secondary Distribution Systems
- 301-04 - Distribution System Components and Application
- 301-05 - Characteristics of Distribution Switchgear
- 301-06 - Load Characteristics and Management
- 301-07 - Principles of Revenue Metering
- 301-08 - Single and Poly-phase Metering
- 345-01 - NERC Overview and Application for Generator Operators
- 350-01 - Elements of System Protection
- 350-02 - Types of Protective Relays
- 350-03 - Monitoring System Conditions
- 350-04 - Disturbance Monitoring Equipment
- 350-05 - Line Protection
- 350-06 - Transformer Protection
- 350-07 - Pilot Protection
- 350-09 - Bus Protection
- 350-10 - Generator Protection
- 350-11 - Protection System Misoperation and Maintenance
- 350-12 - Protection Systems Maintenance Programs
- 375-01 - Real Power Balancing Control Performance
- 375-02 - Disturbance Control Performance
- 375-03 - Frequency Response and Bias
- 375-05 - Automatic Generation Control
- 376-01 - Bulk Power System Communication Basics
- 376-02 - Bulk Power System Communications and Coordination
- 377-01 - CIP Personnel Responsibilities
- 377-02 - CIP Perimeters and Configurations
- 377-03 - CIP Controls and Management
- 377-04 - CIP Related BES Recovery Plans
- 377-05 - CIP Physical Security
- 378-01 - Emergency Policies and Procedures
- 378-02 - Capacity and Energy Emergencies
- 381-05 - Reliability Coordination – Planning and Operations
- 381-06 - Coordinating Entities and Duties
- 386-01 - Reliability Responsibilities and Authorities
- 387-01 - Energy Production and Transfers
- 387-02 - Transmission Operations
- 387-03 - Economic Power System Operations
- 387-04 - Power System Control Elements
- 387-05 - Interconnected Energy Accounting
- 387-07 - Supervisory Control and Data Acquisition Systems (SCADA)
- 387-10 - Power System Restoration
- 388-01 - Active and Reactive Power Fundamentals
- 388-02 - Active and Reactive Power Limits and Flows
- Additional Industrial Skills Training from SOS
Electrical Maintenance
- 401-01 - Electron Theory
- 401-02 - Magnetism and Electromagnetism
- 401-03 - Ohms and Kirchoffs Laws Relating to DC Circuits
- 401-04 - Evaluating Series and Parallel DC Circuit Performance
- 401-05 - Determine Circuit Outputs from Specified Inputs
- 402-01 - Introduction to Alternating Current
- 402-02 - Ohms and Kirchoffs Laws Involving AC Circuits
- 402-03 - Inductance in AC Circuits
- 402-04 - Capacitance in AC Circuits
- 402-05 - Impedance in AC Circuits
- 402-06 - AC Power
- 402-07 - Fundamentals of Three-Phase AC
- 405-01 - Power Quality
- 405-02 - Harmonics
- 405-03 - High-voltage AC
- 409-01 - AC Induction Motors
- 409-02 - AC Generators
- 409-03 - AC Induction Motor Theory
- 409-04 - Troubleshooting AC Induction Motors
- 409-05 - AC Induction Motor Maintenance
- 409-06 - Overhauling Induction Motors
- 409-07 - Generator System Heat Protection
- 409-08 - Generator Overhaul
- 409-09 - DC Motors and Generators
- 409-10 - DC Motors and Generators Troubleshooting and Maintenance
- 411-01 - Introduction to Motor Controls
- 411-02 - Motor Protection and Fault Diagnosis
- 411-03 - Motor Control Troubleshooting
- 411-04 - Motor Control Centers
- 413-01 - AC Drives Overview
- 415-01 - Transformer Basics
- 415-02 - Transformer Design and Components
- 415-03 - Transformer Connections
- 415-04 - Special Transformers
- 416-01 - Battery Basics
- 416-02 - Electrical Backup Systems
- 416-03 - Uninterruptible Power Supplies (UPS)
- 417-01 - Switchgear
- 417-02 - Low Voltage Breakers
- 417-03 - Medium and High Voltage Switchgear
- 417-04 - General Switchgear Maintenance
- 417-05 - Breaker Specific Maintenance
- 417-06 - Circuit Breaker Time-Travel Characteristics and Testing
- 418-01 - Electrical Faults and Current Ratings
- 418-02 - Overcurrent Protection; Fuses and Breakers
- 418-03 - Protective Relays
- 418-04 - Generator, Transformer, and Motor Protection
- 418-05 - Grounding and Bonding
- 419-01 - MOV (Motor Operated Valve) Application and Construction
- 419-02 - MOV (Motor Operated Valve) Disassembly and Inspection, Part 1
- 419-03 - MOV (Motor Operated Valve) Disassembly and Inspection, Part 2
- 419-04 - Limit Switch Adjustment
- 421-01 - Wire and Cable Management
- 421-02 - Terminating and Connecting Wires in a Control Panel
- 421-03 - Making Connections in a Junction Box
- 421-04 - Installing Conduit and Pulling Wire
- 423-01 - Introduction to Medium Voltage Cable
- 423-02 - Medium Voltage Splices and Terminations
- 425-01 - Troubleshooting AC Circuits
- 425-02 - Troubleshooting DC Circuits
- 427-01 - Electrical Freeze Protection Components and Application
- Additional Industrial Skills Training from SOS
Process Systems and Operations
- 701-01 - Introduction to Petroleum Refining
- 701-02 - Basic Petroleum Chemistry
- 701-03 - OSHAs Process Safety Management Standard
- 701-04 - History of Refining
- 707-01 - Features and Operation of Process Heaters
- 709-01 - Features and Uses of Process Tanks
- 711-01 - Introduction to Distillation
- 711-02 - Start-up; Normal Operation and Shutdown of a Distillation Column
- 713-01 - Introduction to Process Separators
- 715-01 - Introduction to Process Reactors
- 717-01 - Introduction to Naphtha Reforming
- 719-01 - Safety Alarm Systems and Instrumentation
- 719-02 - Overpressure Safety Systems
- 721-01 - Process Utilities Systems, Part 1
- 721-02 - Process Utilities Systems, Part 2
- 723-01 - Process Product Movement and Shipment
- 723-02 - Tanks and Vessels Used for Storage
- 725-01 - Sampling Principles and Methods
- 725-02 - Testing Principles and Procedures
- Additional Industrial Skills Training from SOS
Industrial Machining and Welding
- 801-01 - Introduction to Measuring and Care of Measuring Tools
- 801-02 - Measuring Rules and Tapes
- 801-03 - Micrometers
- 801-04 - Fixed Gauges
- 801-05 - Measuring with Calipers
- 801-06 - Dial Indicators
- 801-07 - Telescoping Gauges
- 803-01 - Layout and Bench Work
- 803-02 - Threading and Tapping
- 805-01 - Vertical Milling Machine
- 807-01 - Engine Lathe
- 809-01 - Surface Grinder
- 811-01 - Pedestal Grinder
- 813-01 - Bandsaw
- 815-01 - Drill Press
- 820-01 - Scaffold Erection and Components
- 820-02 - Rigging, Part 1
- 820-03 - Rigging, Part 2
- 820-04 - Rigging, Part 3
- 820-05 - Ladders
- 820-06 - Overhead Cranes
- 820-07 - Aerial Lift Devices
- 841-01 - Safe Welding and Cutting Practices
- 841-02 - Weldability of Metals
- 841-03 - Shielded Metal Arc Welding (SMAW)
- 841-04 - Gas Metal Arc Welding (GMAW)
- 841-05 - Tungsten Inert Gas (TIG) Welding
- 841-06 - Oxyacetylene Welding (OAW)
- Additional Industrial Skills Training from SOS
Instrumentation and Control
- 603-01 - Instrumentation and Control Overview
- 603-02 - Principles of Temperature
- 603-03 - Principles of Pressure
- 603-04 - Principles of Level
- 603-05 - Principles of Flow
- 603-06 - Temperature Instruments
- 603-07 - Pressure Measuring Devices
- 603-08 - Level Measuring Devices
- 603-09 - Flow Measuring Devices
- 603-15 - Weight Measuring Devices
- 605-01 - Multimeters
- 605-02 - Oscilloscopes
- 605-03 - Power Suplies
- 605-04 - Signal Generators
- 605-05 - Digital Thermometers and Calibrators
- 605-06 - Manometers
- 605-07 - Pressure and Vacuum Calibrators
- 605-08 - Megohmmeters
- 607-01 - Analytical Instruments
- 607-02 - Introduction to Analytical Testing
- 609-01 - Calibration Overview, Part 1
- 609-02 - Calibration Overview, Part 2
- 609-03 - Introduction to Troubleshooting
- 609-04 - Instrument Troubleshooting
- 611-01 - P&ID Basics
- 611-02 - Reading a P&ID
- 611-03 - Electrical Drawings
- 611-04 - Logic Diagrams
- 611-05 - Industrial Print Reading Overview
- 613-01 - Introduction to Automated Control
- 613-02 - Pneumatic and Electronic Control System
- 613-03 - Introduction to Switches
- 613-04 - Electronic Control Systems
- 615-01 - Signal Transmission
- 615-02 - Basic Principles of Industrial Transmitters
- 615-03 - Smart Transmitters
- 615-04 - Transducers
- 617-01 - Controller Control Modes
- 617-02 - Operation of Automatic-Manual Transfer Stations
- 617-03 - Final Control Elements
- 619-01 - Introduction to Industrial Electronics
- 619-07 - Digital Electronics and Microprocessors
- 621-01 - Introduction to Programmable Logic Controllers (PLC)
- 621-02 - InputOutput IO Processing
- 621-03 - Inputs and Outputs
- 621-04 - PLC (Programmable Logic Controllers) Programming Instructions, Part 1
- 621-05 - PLC (Programmable Logic Controllers) Programming Instructions, Part 2
- 621-06 - PLC (Programmable Logic Controllers) Networks
- 621-07 - PLC (Programmable Logic Controllers) Network Protocols
- 670-01 - Air Conditioning Fundamentals
- 670-02 - Ductless Air Conditioning
- 670-03 - Introduction to Industrial and Commercial Refrigeration
- 670-05 - Refrigerant System Troubleshooting
- 670-06 - Chiller Design and Maintenance
- 670-09 - Ducting and Air Movement for HVAC Systems
- Additional Industrial Skills Training from SOS
Power Generating Systems and Operations
- 501-01 - Energy Conversion
- 501-02 - Steam Turbine Basics
- 501-03 - Combustion System Component Overview
- 501-04 - Boiler Water and Steam Cycle Overview
- 501-05 - Generator Overview
- 505-01 - Steam Turbine Design
- 505-02 - Steam Turbine Control and Operation
- 505-03 - Steam Turbine Auxiliaries
- 505-10 - Steam Turbine Governor System
- 507-01 - Generator and Auxiliary Systems Functions
- 507-02 - Generator and Auxiliary Systems Flow Paths and Major Components
- 507-03 - Generator Construction and Process Control
- 507-04 - Generator and Auxiliary Systems Start-up
- 507-05 - Generator and Auxiliary Systems Normal Operations
- 507-06 - Generator and Auxiliary Systems Shutdown
- 511-01 - Gas Turbine Fundamentals and Configuration of Generating Facilities
- 511-02 - Introduction to the GE LM Series Gas Turbine
- 511-03 - Introduction to GE Frame Series Gas Turbines
- 511-04 - Introduction to the Siemens V-Series Gas Turbine
- 511-05 - Heavy Duty Gas Turbines – Major Components and Support Systems
- 511-07 - Aero-derivative Gas Turbines – Major Components and Support Systems
- 511-10 - Fundamentals of Gas Turbine Operation and Routine Maintenance
- 511-11 - Gas turbine Control Schemes
- 511-12 - Gas Turbine Fuel and Combustion Systems
- 511-13 - Gas Turbine Lube Oil and Control Oil Systems
- 511-14 - Gas Turbine Air Systems
- 511-15 - Gas Turbine Water Wash and Drain Systems
- 521-01 - Introduction to Combustion Air and Flue Gas Systems
- 521-02 - Combustion Air and Flue Gas Flow Paths and Components
- 521-03 - Control Loops and Methods of Control
- 521-04 - Combustion Air and Flue Gas System Start-up
- 521-05 - Maintaining Fan Operations in Combustion Air and Flue Gas Systems
- 521-06 - Shut Down Process
- 522-01 - Coal Handling System
- 523-01 - Boiler Fuel System Function
- 523-02 - Process and Methods of Control for the Boiler Fuel System
- 523-03 - Boiler Fuel System Start-up
- 523-04 - Normal Operation of the Boiler Fuel Systems
- 523-05 - Shutdown for the Boiler Fuel System
- 531-01 - Combustion Theory
- 531-02 - Basic Boiler Design
- 531-03 - Boiler Valves and Fittings
- 531-04 - Boiler Fuel and Air Systems
- 531-05 - Boiler Water and Steam Cycle
- 531-06 - Boiler Heat Recovery Systems
- 531-07 - Scrubbers and Ash Removal Systems
- 531-08 - Boiler Operator Roles and Responsibilities
- 533-01 - Fuel Combustion and Controls
- 533-02 - Boiler Burner Controls and Management
- 535-01 - Flue Gas Desulfurization System
- 535-02 - Flue Gas Desulfurization System, Open Spray Design, Part 1
- 535-03 - Flue Gas Desulfurization System, Open Spray Design, Part 2
- 535-04 - Dry Scrubber Operation
- 535-05 - Selective Catalytic Reduction (SCR) System
- 535-09 - Introduction to Continuous Emission Monitoring Systems
- 535-10 - Fundamentals of Using a CEMS
- 535-11 - Calibration of CEMS Components
- 551-01 - Introduction to the Circulating Water System
- 551-02 - Function of the Circulating Water System
- 551-03 - Circulating Water System Components
- 551-04 - Circulating Water System Start-up
- 551-05 - Circulating Water System Normal Operations
- 551-06 - Circulating Water System Shutdown
- 551-07 - Circulating Water System Controls
- 551-08 - Cooling Towers Operating Principles and Designs
- 551-09 - Cooling Towers Components
- 551-10 - Air Cooled Condensers
- 553-01 - Introduction to the Condensate System
- 553-02 - Introduction to the Feedwater System
- 553-03 - Condensate and Feedwater Systems Operation
- 553-04 - Condensate and Feedwater System Control
- 555-01 - Boiler Feed Pumps and Associated Auxiliary Equipment
- 555-02 - Boiler Feed Pump Flow Path and Major Components
- 555-03 - Boiler Feed Pump Water Supply and Control Systems
- 555-04 - Boiler Feed Pump Start-up
- 555-05 - Boiler Feed Pump Daily Operations
- 557-01 - Function of the Boiler Water and Steam Systems
- 557-02 - Flow Paths and Components of the Boiler Water and Steam Systems
- 557-03 - Process Controls for the Boiler Water and Steam Systems
- 557-04 - Start-up Procedures for the Boiler Water and Steam Systems
- 557-05 - Normal Operation of the Boiler Steam and Water Cycle
- 557-06 - Shutdown of the Boiler Water and Steam Systems
- 559-01 - Molecular Chemistry of Water
- 559-02 - Elements and the Periodic Table of Elements
- 559-03 - Chemical Compounds
- 559-04 - Corrosion Causes and Effects
- 559-05 - Corrosion Control in Steam Production
- 559-06 - Steam Chemistry Control and Guidelines
- 559-07 - Industrial Water Treatment Systems
- 559-08 - Introduction to Desalination
- 559-09 - Desalination: Pre- and Post-treatment of Water
- 559-10 - Reverse Osmosis
- 559-11 - Thermal Desalination Technologies
- 560-01 - Main Transformers
- 560-02 - Station Service System
- 560-03 - Fuses and Circuit Breakers
- 560-04 - Plant Protection Protective Relays and Instrument Transformers
- 560-05 - Equipment Disconnects and Grounding
- 561-01 - Preparing for Power Plant Start-ups
- 561-02 - Power Plant Start-up Procedures
- 561-03 - Preparing for Power Plant Shutdowns
- 561-04 - Power Plant Shutdown Procedures
- 563-01 - Basic Power Plant Efficiency
- 563-02 - Water and Steam Terms and Principles
- 563-03 - Heat Transfer Principles
- 563-04 - Laws and Principles of Thermodynamics
- 563-05 - Performance Parameters
- 563-06 - Balancing Efficiency; Availability; Capability and Flexibility
- 563-07 - Instrumentation and Controls
- 563-08 - Boiler Efficiency
- 563-09 - Boiler Reliability
- 563-10 - Turbine Efficiency
- 563-11 - Condenser Efficiency
- 563-12 - Condenser Operation and Reliability
- 563-13 - Feedwater Heater Operation and Efficiency
- 563-14 - Pump Efficiency and Reliability
- 563-15 - Environmentally Sensitive Operations
- 565-01 - Distributed Control System Fundamentals
- 565-02 - Distributed Control System Components
- 565-03 - Using Distributed Control System Diagrams
- 565-04 - Power Plant Unit Control
- 567-01 - Understanding the Basic Properties of Water and Steam
- 567-02 - Saturated Steam Tables
- 567-03 - Superheated Steam Tables
- 581-01 - Diesel Engines for Power Generation
- 581-02 - Diesel Engine Support Systems
- 581-03 - Diesel-Powered Generation
- 581-04 - Diesel Power Plant Operations
- 581-05 - Diesel Plant Control Systems and Protective Devices
- 581-06 - Diesel Plant Routine Maintenance
- 582-01 - Combined Cycle Power Plants
- 582-02 - Combined Cycle Power Plant Components
- 582-03 - HRSG Flow Path and Major Equipment
- 582-04 - HRSG – Auxiliary Equipment and Systems
- 582-05 - HRSG Basic Operating Concerns and Conditions
- 582-06 - Combined Cycle Steam and Feedwater Operating Principles
- 582-07 - Combined Cycle Condensate and Circulating Water Systems
- 582-08 - Combined Cycle Auxiliary Systems
- 583-01 - The Hydroelectric Role in the Power System
- 583-02 - Hydroelectric Power Stations
- 583-03 - Water Management
- 583-04 - Hydroelectric Generators
- 583-05 - Generator Monitoring and Control
- 583-06 - Hydroelectric Plant Auxiliaries
- 583-07 - Operating Electrical Equipment in a Hydroelectric Plant
- 583-08 - Mechanical Governor
- 584-01 - Introduction to Biomass Power Plants
- 584-02 - Biomass and Waste to Energy Power Plants
- 585-01 - Basic Wind Turbine Design
- 585-02 - Wind Farm Design
- 585-03 - Horizontal Wind Turbine Design and Operation
- 585-04 - Wind Energy Production
- 586-01 - Introduction to Reciprocating Engine Power Plants
- 586-03 - Fundamentals of Reciprocating Engine Design
- 586-05 - Reciprocating Engine Auxiliary Systems
- 586-06 - Reciprocating Engine Electrical and Control Systems
- 586-07 - Reciprocating Engine Operations
- 586-09 - Generator Control in Reciprocating Engine Power Plants
- 587-01 - Nuclear Power Principles and Design
- 587-02 - PWR and BWR Operation and Design
- 589-01 - Introduction to Solar Energy
- 589-03 - Solar Energy Photovoltaic
- 589-05 - Solar Energy Thermal Applications
- Additional Industrial Skills Training from SOS